OPTILED JAPAN announced that the company's fluorescent LEDs were adopted by the famous Yongping Temple. Set in Yongping Temple is the "REALTUBE" series of products sold by the company. A total of 240 fluorescent LEDs were installed in the lecture hall and the main hall of Yongping Temple. It is also scheduled to be gradually adopted in multiple facilities in the future. Yongping Temple has been promoting environmentally-friendly temple activities. As part of this, fluorescent lamps have been used.
According to Austria's bright Japan, the lighting energy consumption of Yongping Temple is relatively large, and the maintenance burden of each facility on the replacement of fluorescent lamps is heavy. By changing the lighting of the lecture hall and the hall from fluorescent lamps to fluorescent LEDs, not only the energy consumption of the lighting is reduced, but also the work of replacing the fluorescent lamps every day is eliminated, and the maintenance cost is reduced. In addition, the light of the LED is almost free of ultraviolet rays, so it is also expected to prevent damage to the cultural relics caused by the illumination.
After the setting. Quoted from the release of the bright light of the Olympics.
The appearance of the OPJ-1200NC. Listed from the bright release of Austria
The fluorescent LEDs set this time are the REALTUBE series "OPJ-1200NC". The OPJ-1200NC is set on a high ceiling. The outer dimensions of the OPJ-1200NC are 1198mm long and 26mm in diameter. The total luminous flux when inputting 18W is 1500 lm, and the illuminance of 1 m directly below the horizontal plane is 399 lx. The average color rendering index (Ra) is 72.
Lock Motor product introduction:
Safe Lock Motor, also known as The anti-theft lock motor, in the field of electronic Lock technology, Safe Lock Motor is a mechanical Lock components associated with the electronic control unit of the important parts.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features: Motor For Safe Lock is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the Safe Lock Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc Safe Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Gear Motor For Safe Lock should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Safe Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Gear Motor For Safe Lock should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Dc Motor For Safe Lock is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Safe Lock Motor
Safe Lock Motor,Motor For Safe Lock,Dc Motor For Safe Lock,Gear Motor For Safe Lock
Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com