When decorating a home, it is very important to arrange the switch socket of the kitchen embedded oven. When setting up the oven socket, it is not only reasonable to think about how to install it, but also to consider the safety of electricity. So, can the built-in oven socket be placed behind? How to install the oven is safe? Let's learn about the related electrical safety tips with the safety net!

Can the built-in oven socket be placed behind?

Embedded oven installation method

Since the embedded oven should be installed in close cooperation with the kitchen, and the oven itself will be hot during use, it is necessary to pay attention to the installation distance when installing the embedded oven, especially paying attention to heat dissipation.

All ovens are suitable for the installation of standard cabinets. Since the temperature of the oven is very high during use, cabinets equipped with electric ovens must be made of high-temperature materials for electrical appliances to ensure safety. The oven can only be on the wall or on one side of the cabinet panel over the oven panel. Do not design the refrigerator on the side of the oven. Otherwise, the refrigerator will consume more energy to achieve the cooling effect, and it may damage the insulation layer of the refrigerator. Installation, you need to add a heat shield. In order to prevent the adjacent cabinet door panel from being damaged by high temperature, a certain gap is required between the front panel of the oven and the cabinet cabinet for air circulation. All ventilation holes or vents should not be covered, otherwise it will affect the performance of the machine.

Built-in oven socket installation location:

1. If the socket is installed directly behind the oven, reserve 30mm more than the depth of the oven (530mm).

2. It is recommended that you install it on the wall next to the oven cabinet or in the free space, so that you can operate it.

3, the rated voltage of the oven is 220V, the rated frequency is 50HZ, 16A (three holes) socket.

4. It is recommended to use the wire with a cross-sectional area of ​​four squares to be used simultaneously with other electrical appliances, which is convenient.

It can be seen that for the overall aesthetics, the socket of the embedded oven can be installed behind the oven, but since the oven is a high-voltage product, it is necessary to pay attention to insulation.

1200V DC Electronic Load System

1200V DC Electronic Load System has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.1200V DC Electronic Load system including 39600W/52800W/66000W.BTW,if the 1200V is too big voltage for application,it can also choose lower 200V DC Electronic Load System and higher 1200V DC Electronic Load System .


kindly check below features are for your reference:


● Flippable front panel and color touch screen allow convenient access and operation
● Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
● Adjustable current slew rate, adjustable CV loop speed
● Ultra high precision voltage & current measurement
● OCP/OPP testing function
● 50kHz high-speed CC/CR dynamic mode
● 500kHz high-speed voltage and current sampling rate
● Timing & discharging measurement for batteries
● Short circuit test mode
● Auto mode function provides an easy way to do complicated test
● Dynamic frequency sweep function for determining worst case voltage peaks*
● Non linear load mode function makes the simulated loading current more realistic*
● Supports external analog control function*
● V-monitor/I-monitor
● LED load simulation function
● Full protection: OCP, OPP, OTP, over voltage and reverse alarm
● Up to 20 units master/slave parallel control
● Front panel USB interface supports data import and export
● SCPI language and standard rack size make it ideal for ATE System integration
● Smart fan control with lower noise and better for environment
● Multi versions to meet the cost performance and different applications
* Only professional Electronic Load units support these functions

1200V Battery Discharge DC E-load, 1200V Short circuit DC electronic load, 120V IV-monitor DC electronic load

APM Technologies Ltd , https://www.apmpowersupply.com