The arrangement of the ED and the specification of the LED source determine the basic driver requirements. The main function of the LED driver is to limit the current flowing through the LED under certain operating conditions, regardless of the input and output voltage changes. The basic working circuit diagram of the LED driver is shown in Figure 1. The so-called "isolation" means that there is no physical electrical connection between the AC line voltage and the LED (ie, input and output). The most common is to use a transformer to electrically isolate. And "non-isolated" does not use high-frequency transformers for electrical isolation.
It is worth mentioning that in the LED lighting design , the two parts of the AC-DC power conversion and constant current drive can be configured differently:
(1) Integral configuration, that is, the two are fused together, all located in the lighting fixture, the advantages of this configuration include optimizing energy efficiency and simplifying installation;
(2) Distributed configuration, that is, the two exist separately, this configuration simplifies security considerations and increases flexibility.
How to choose LED driving method
Typical LED drivers on the market today include two types, linear drivers and switch drivers; the approximate range of application is shown in Figure 2. Switching regulators are used for high current applications with currents greater than 500 mA because linear actuators are limited to their own structural reasons. Provides such a large current; in low current applications with currents below 200mA, linear regulators or split regulators are typically used; in medium to 200mA to 500mA, linear regulators can be used. A switching regulator can be used.
Switching regulators are energy efficient and offer excellent brightness control. The linear regulator structure is simple, easy to design, provides steady current and overcurrent protection, and has no electromagnetic compatibility (EMC) problems.
In low-current LED applications, the resistive driver, although low in cost and simple in structure, has a low forward current under low voltage conditions, which causes LED brightness to be insufficient and under transient conditions such as load dump. The LED may be damaged; and the resistor is an energy consuming component, and the overall solution is less energy efficient, see Figure 3.
Features & Advantages:The Mobile Led Screen can be fixed on a variety of trucks for easy movement;Used for live broadcast, live meeting, banquet, party, shows,advertising, etc, display the content what you want;A high gray scale of 16-bit ensures the rich color and commendably solve the problem of the mosaic, have the excellent consistency of light;It plays by video, graphics, animation etc, connect with PC computer or network, also can remote control with asynchronous system;It contains a minimum brightness of 5500nits or higher(adjusted), ensure that the clarity of the picture and convey the content completely even under direct sunlight;Big viewing angle to 140 degree at horizontal as well as 140 degree at vertical to guarantee that viewers can see clear view at every angle and there is no picture blear;The ingress protection of the front is Ingress Protection Level of 65/54 (front/rear), which meets the standard of Outdoor Led Display. Waterproof and dust-proof are basic function of outdoor LED displays, the level of IP65 promise that the screen is completely anti-dust and protect water shooting from any range. Anti-corrosion, Anti-rust;Good Shock Resistance for Moving;We accept customization, Cabinet and panel size can be customized according different projects.
Mobile Led Display,Mobile Led Screen,Led Display Mobiles,Portable Led Display
Shenzhen Bako Vision Technology Co., Ltd. , http://www.rentalleddisplays.com