Restaurant lighting selection considerations

Although the method of purchasing restaurant lighting is simple, there are some issues that need attention. So, how to buy restaurant lighting? What should pay attention to the purchase of restaurant lighting? Next I will talk about the restaurant lighting purchase considerations.

1. Accurately measure the area and height of the restaurant;

2. Pay attention to the accurate composition of the shaped restaurant;

3, determine the size of the restaurant furniture should be consistent with the area of ​​the restaurant;

4, determine the restaurant table and display area set position;

5, according to the size of the restaurant to buy the right main light;

6, according to the location of the table to buy dishes highlight the dishes;

7. Choose suitable spotlights for the exhibition area;

8, pay attention to the restaurant main lights, auxiliary lights should use light intensity, color accurate light;

9, a large area restaurant can set up lights in the corner, to supplement the upward scattered light restaurant.

This series high power density programmable dc electronic load provides three voltage ranges 200V DC Electronic Load/600V  DC electronic load /1200V DC Electronic Load. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity,which can make DC Electronic Load System in 200V  DC Electronic Load System,600V DC electronic load System,1200V DC Electronic Load System . This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

Speical features as below:

● Flippable front panel and color touch screen allow convenient access and operation
● Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
● Adjustable current slew rate, adjustable CV loop speed
● Ultra high precision voltage & current measurement
● OCP/OPP testing function
● 50kHz high-speed CC/CR dynamic mode
● 500kHz high-speed voltage and current sampling rate
● Timing & discharging measurement for batteries
● Short circuit test mode
● Auto mode function provides an easy way to do complicated test
● Dynamic frequency sweep function for determining worst case voltage peaks*
● Non linear load mode function makes the simulated loading current more realistic*
● Supports external analog control function*
● V-monitor/I-monitor
● LED load simulation function
● Full protection: OCP, OPP, OTP, over voltage and reverse alarm
● Up to 20 units master/slave parallel control
● Front panel USB interface supports data import and export
● SCPI language and standard rack size make it ideal for ATE System integration
● Smart fan control with lower noise and better for environment
● Multi versions to meet the cost performance and different applications
* Only professional Electronic Load units support these functions

DC Electronic Load

DC electronic load,electronic load,DC load,ac electronic load, electronic load

APM Technologies (Dongguan) Co., Ltd , https://www.apmpowersupply.com