Model NO.: UDC-18GM-400-3E3
Customized: Customized
Color: Silver
Usage: Position Sensor
Theory: Ultrasonic Sensor
Material: Plastic
Trademark: Winston/OEM/Neutral
Transport Package: Neutral Carton Packing
Specification: CE
Origin: China, Zhejiang, Wenzhou
HS Code: 90330000
• Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers
• No TEACH-IN required
• Function indicators visible from all directions
• Insensitive to printing, colors, and shining surfaces
• Material weight from 10 g/m 2 up to over 2000 g/m 2
• Very wide material spectrum, finest papers up to thin sheet metals as well as plastic- and metal foils
• Perpendicular or inclined sensor mounting relative to the sheet plane possible
• Programmable


Technical parameters                   
General specifications
Sensing range 20 ... 60 mm , optimal distance: 45 mm
Transducer frequency 395 kHz
Indicators/operating means
LED green indication: single sheet detected
LED yellow Indication: No sheet detected (Air)
LED red indication: double sheet detected
Electrical specifications
Operating voltage U b 18 ... 30 V DC , ripple 10 % SS
No-load supply current I 0 < 80 mA
Time delay before availability t v < 500 ms
Input
Input type Function input
0-level: -U B ... -U B + 1V
1-level: +U B - 1 V ... +U B
Pulse length ≥ 100 ms
Impedance ≥ 4 kΩ
Output
Output type  3 switch outputs NPN, NC
Rated operating current I e 3 × 100 mA , short-circuit/overload protected
Voltage drop U d ≤ 2 V
Switch-on delay T on approx. 15 ms (shorter response time on request)
Switch-off delay T off approx. 15 ms (shorter response time on request)
Pulse extension min. 120 ms programmable
Ambient conditions
Ambient temperature 0 ... 60 °C (32 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Connection type cable PVC , 2 m
Core cross-section 0.14 mm
Protection degree IP67
Material
Housing nickel plated brass; plastic components: PBT
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass 150 g
General information
Supplementary information  Switch settings of the external programming adapter:
"output load": pull-up
"output logic": inv

Diagrams                   
Ultrasonic Transducer Double Sheet Sensor (UDC-18GM-400-3E3)
Dimension            
Ultrasonic Transducer Double Sheet Sensor (UDC-18GM-400-3E3)
Additional information           
Ultrasonic Transducer Double Sheet Sensor (UDC-18GM-400-3E3)
Ultrasonic Transducer Double Sheet Sensor (UDC-18GM-400-3E3)
Connection              
Ultrasonic Transducer Double Sheet Sensor (UDC-18GM-400-3E3)
 

 Description of sensor functions
The ultrasonic double sheet monitor is used for double sheet detection in all situations in which the automatic distinction between double and single sheets is required in order to protect machines or avoid waste production. The double-sheet monitor is based on the ultrasonic through-beam principle. The following can be detected:
- No sheet, i.e. air,
- Individual sheet
- Double sheet
A microprocessor system evaluates the signals. The appropriate switch outputs are set as a result of the evaluation. Changes in ambient conditions such as temperature and humidity are compensated for automatically. The interface electronics is integrated into a compact M18 metal housing together with a sensor head.

 

Switching on
The sensor is equipped with 6 connections. The functionality of the connections is described in the following table. The function input
(PK) is used to assign parameters to the sensor. (See Output pulse extension, Alignment aid and Program selection). During normal
operation, the function input must always be securely connected with +U B or -U B , to avoid possible interference or improper functionality.

Colour Switching on Comments
BN +U B  
WH Switch output for single sheets Pulse width corresponds to the event
BK Switch output for double sheets Pulse width corresponds to the event
GY Switch output for air Pulse width corresponds to the event
PK -U B /+U B Function input for parameter assignment/
pulse prolongation
BU -UB  

 

Normal mode
The sensor is working in normal mode if the function input (PK) is applied to -U B or +U B when the power source (Power-On) is supplied,
as shown in the output pulse extension table (see below).
Displays:
LED yellow:      Detection of air
LED green:      Detection of single sheets
LED red:          Detection of double sheets
Switch outputs:
The switch outputs are only active in normal operation!
White:      WH     Single sheet output
Black:      BK      Double sheet output
Gray:       GY       Air output

 

Procedure for assigning parameters
It is possible to switch to additional parameter assignment modes from the display mode:
         Alignment mode -->
         Program selection mode -->
         Alignment aid mode --> (for checking)
When the function input (PK) is applied to -U B (for > 500 ms), the mode changes. When the "Program selection" mode is active, swit-
ching on function input (PK) on to +U B (for > 500 ms) selects the next program level.
Disconnecting the power supply causes the system to exit the current mode with the selected program change.
The switch outputs are not active while parameters are being assigned to the sensor!

Ultrasonic Transducer Double Sheet Sensor (UDC-18GM-400-3E3)

Outdoor Snow Melting Heat Film has many usage,such as Snow Melting Car Cover,Traffic Light Snow Melting,Cctv Camera Snow Melting,Outdoor Snow melting heat film,snow melting car cover,traffic light snow melting,CCTV camera snow melting, Melting Snow garage heat film,melting snow garage floor,melting snow in yard,melting snowman kit,snow melting dumpster,snow melting equipment manufacturers,snow melting jet engine,snow melting mats for stairs,snow melting products,snow melting heat films for solar panels,snow melting solution,electric antifreeze protection heating mat heating film apply for solar panel etc.we are a professional and leader Chinese exporter of heat film,Customization options(for example: SMT components,flex cable and connectors) can provide the perfect complete solution that can significantly reduce assembly time and increase productivity.Providing a variety of complex shapes design,and different power designs. Membrane in the same piece electrically heated heating circuit can be designed and holding circuit,we are looking forward to your cooperation.

Snow Melting Heat Film For Outdoor Facility

Traffic Light Snow Melting,Cctv Camera Snow Melting,Snow Melting Heat Film For Outdoor Facility,Snow Melting Car Cover

ShenZhen XingHongChang Electric CO., LTD. , http://www.xhc-heater.com