With the continuous development and improvement of science and technology, the extremely unapproachable extreme sound quality effect is no longer so far away. Even some low-end speakers with relatively low prices can bring some good sound quality feelings. Good speakers can make the sound more True, it is also rich in the details of the sound, but with the continuous development of technology, a three-way speaker appears before people. What are the advantages of three-way speakers over traditional two-way speakers? What should our average consumer pay more attention to when purchasing speaker products?
First of all, we have to understand what is a two-way divider and what is a three-way divider? The two-way divider consists of a high-pass filter and a low-pass filter. The three-way divider also adds a band-pass filter because the filter exhibits a certain slope near the cross-over frequency. The attenuation characteristic theoretically requires that the larger the attenuation rate of the filter, the better. This is due to the fact that in the adjacent districts and counties, the attenuation phase is called the crossover point, and there is an overlapping frequency band near the crossover point. Within a certain frequency band near a point of considerable loan, there will be two speakers that sound together. When the horn response is smooth, the attenuation characteristics of the frequency divider are also ideal. The larger the single attenuation rate, the more components and the more complex the structure, the more difficult it is to adjust.
Therefore, compared to the two-way speaker treble bass, three-way speakers will appear three high-middle tones, the transition process will be more gentle and soft, if the horn response peaks and valleys, the sense of hearing will not appear two obvious cliff sound, Especially when listening to relatively soft vocals, the effect of emptiness is better, but at the same time it is more difficult to select horns, and the cost and technical difficulty are also increased a lot.
In theory, the two-way frequency divider is simple in construction, smaller in size, and lower in cost than the three-way speaker. However, the disadvantage is that the sound level is insufficient. The three-way high-frequency and low-frequency transitions are more gentle, but the requirements for the frequency divider are more stringent, and the quality and technical requirements for the frequency divider are higher, and the cost is naturally higher.
First of all, we have to understand what is a two-way divider and what is a three-way divider? The two-way divider consists of a high-pass filter and a low-pass filter. The three-way divider also adds a band-pass filter because the filter exhibits a certain slope near the cross-over frequency. The attenuation characteristic theoretically requires that the larger the attenuation rate of the filter, the better. This is due to the fact that in the adjacent districts and counties, the attenuation phase is called the crossover point, and there is an overlapping frequency band near the crossover point. Within a certain frequency band near a point of considerable loan, there will be two speakers that sound together. When the horn response is smooth, the attenuation characteristics of the frequency divider are also ideal. The larger the single attenuation rate, the more components and the more complex the structure, the more difficult it is to adjust.
Therefore, compared to the two-way speaker treble bass, three-way speakers will appear three high-middle tones, the transition process will be more gentle and soft, if the horn response peaks and valleys, the sense of hearing will not appear two obvious cliff sound, Especially when listening to relatively soft vocals, the effect of emptiness is better, but at the same time it is more difficult to select horns, and the cost and technical difficulty are also increased a lot.
In theory, the two-way frequency divider is simple in construction, smaller in size, and lower in cost than the three-way speaker. However, the disadvantage is that the sound level is insufficient. The three-way high-frequency and low-frequency transitions are more gentle, but the requirements for the frequency divider are more stringent, and the quality and technical requirements for the frequency divider are higher, and the cost is naturally higher.
Furniture Sofa And Mattress Staple
Zhejiang Best Nail Industrial Co., Ltd. , https://www.beststaple.com