- Model NO.: NGT1
- Type: Current Fuse
- Shape: Circle
- Fusing Device: Pop-up Solid
- Voltage: 380/800V
- Use: Ar
- Transport Package: Single Box
- Breaking Capacity: High
- Usage: Low Voltage
- Fusing Speed: FF
- Standard: VDE
- Current: 2-160A
- Trademark: DESON
- Origin: China
1. Application
   This series fuse is suitable for AC 50Hz, rated voltage to 1000V, rated current to 2500A. It is mainly used in the electrical circuit for protecting the semiconductor device and it's complete set installment from short-circuit(aR). The rated breaking capacity is to 100KA. They conform to national standard GB13539.1/ GB13539.4 and IEC60269-1/ IEC60269-4.
2.Construction Feature
  The variable cross-section fuse body made by pure silver piece is sealed in the fusion tube which is made by the high strength porcelain or epoxy glass cloth pipe, there is full of the high-purity quartz sand processed after chemistry to take the extinguishing of arc medium in the tube. The two sides of the fuse use the spot welding to reliably connect with the contact. The fuse body may have fuse indicator or striker, when the fuse element fusing,the indicator or the striker can act immediately to display the fuse body has been blown out(indicator) or send out each kind of signal and automatically transfer the circuit(striker).
3.Principle Technical Parameter
Â
fuse model |
models of similar products at home and abroad |
rated vltage (V) |
rated current (A) |
overall dimension/size(mm) |
||||||||
drawing NO. |
A |
B |
C |
D |
E |
F |
H |
Φd |
||||
NGT1 |
RS6-1 |
380/1000 |
63~250 |
5.2 |
68 |
110 |
140 |
48 |
25 |
6 |
- |
10.5 |
FTTH Cabling Accessories we here means the little insignificant parts but they are indispensable conditions when we do FTTH cabling .With quality level we required same as the fiber optic products, we use good quality plastic and stainless steel to make our ftth cabling accessories. Such like heat shrink tube splicing sleeves, conduit box, draw hooks, bending angle, cable clips, and so on.
With these FTTH cabling accessories, it is just like to put a coat on the fibers when you lay them in the wall corner or through the wall holes. The fibers is easily broken during pulling, torsioning and impacting. Besides, the dust cover can keep the fiber away from the dust that the fiber can work with good performance. It is a must to use such FTTH cabling accessories to ensure a qualified fiber play an important role in transmission.
FTTH Cabling Accessories, we also called FTTH Drop Cable Accessories,FTTH Structured Cabling Accessories(Tail Duct,Finishing Groove,Bending Angle, Kok Yin Angle, Hose Connector, Wall Tube,Wall Cable Tube, Plywood Retractors, Hole Wiring Duct,Seal Hole Trough, Hole Wiring Duct,Seal Hole Trough,S Type Fasteners,Dead-End Clamp,). we here means the little insignificant parts but they are indispensable conditions when we do FTTH cabling .With quality level we required same as the fiber optic products, we use good quality plastic and stainless steel to make our FTTH Cabling Accessories. Such like heat shrink tube splicing sleeves, conduit box, draw hooks, bending angle, cable clips, and so on.
With these FTTH Cabling Accessories, it is just like to put a coat on the fibers when you lay them in the wall corner or through the wall holes. The fibers is easily broken during pulling, torsioning and impacting. Besides, the dust cover can keep the fiber away from the dust that the fiber can work with good performance. It is a must to use such FTTH Cabling Accessories to ensure a qualified fiber play an important role in transmission.
We can also offer you:Fastening Hook, Hinger Support, Clamp Nail Buckle,Cable Clip, Clamp Nail Buckle, Fiber Cabling Metal Draw Hooks,Cable Hook,FTTH Clamp Retractor Hinger Support,Cable Manage Ring,Fiber Cabling Manage Ring,FTTH Drop Cable Management Ring.
Fiber Optic Terminal Boxes, 24 port Rack Mount Fiber Enclosure, Sliding Rack Mount Fiber Patch Panel, SMC Terminal Cabinet, FTTH Products
NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com