Carat6508 is a superior network management type switch suitable for industrial Ethernet switches that need to identify IP addresses and remote network management in multi-point control networks.
In terms of environmental adaptation, environmental conditions are more stringent. The carat6508 is still well-adapted, and the alloy shell ensures the requirements of the fuselage strength and anti-electromagnetic interference. The small size makes the carat 6508 more adaptable in its mounting position, and it only takes up little space in the cabinet. For industrial power supplies, a wide power input range of 12 to 48 volts DC is provided. Voltage fluctuations within this voltage range have no effect on data transfer and have redundant power supplies. The power failure relay alarm function also prompts the user promptly where the switch power supply has a problem to avoid loss. At the same time, it also has a network port failure relay alarm function, the user can specify the port to be monitored through the jumper switch, once the network connection is disconnected, the user can immediately be notified. Carat6508 is more user-friendly design, easy to install the card gauge, input power reverse polarity protection, anti-surge and other functions to avoid the user neglect damage to the switch.

In terms of network functions
The carat6508 provides an automatic port rate that accommodates the interconnection between older 10M devices and new 100M devices, while also adapting to full duplex half duplex. If the auto-negotiation between devices is incorrect, the switch can still be set manually. The super ring ring function provides link disconnect protection of less than 300 milliseconds. The excellent performance of wire-speed forwarding can still be achieved when all ports are working. Users are guaranteed to carry multiple service data on the carat6508 ring network. The IGMP function provides support for users' multimedia signal transmission. When carrying multiple service data streams, it is rich. The QOS strategy and rate control provide guarantees for the transmission of critical data. For example, extremely high industrial automatic control signals are required to have the highest priority and occupy enough bandwidth to transmit in real time, while video surveillance signals are allocated relatively low resources. VLAN support enables the switch to handle more complex network topologies and applications.

After the management switch of the switch sets the IP address, user name, and password, you can log in to the switch as a browser to open the switch IP address on any connected network. At this point all management functions can be implemented. To prevent unauthorized access to the exchange,
Or to prevent damage, you can set the security IP that allows access to the switch. Only the set IP address can log in to the switch.
The switch supports the backup and recovery of configuration file backup TFTP. In this way, once the switch is damaged, the previous complicated network settings can still be quickly restored. It also supports switch firmware upgrades for future enhancements. The switch also provides mirroring capabilities to facilitate network traffic analysis and support remote restart functions.